ThermaSol - Commercial Steam

FastStart™ is a patented technology that we utilize to keep the water in the tank pre-heated just below the boiling point. We have found this is essential for commercial settings, as it allows the generator to produce steam in seconds rather than the 5–8 minute wait time typical of standard cold-start units.

While standard residential units run on 240V single-phase power, we also configure commercial-grade Power Pak units for 208V three-phase power. We recommend verifying the facility's specific electrical load and phase with a licensed electrician before final selection.

Yes. When integrated with the ThermaTouch smart controller, we enable the use of the ThermaSol app for remote pre-heating. We find this feature particularly useful for facility managers who wish to synchronize steam availability with morning rushes or guest appointments.

PowerClean™ is an automated, pressurized inner-tank cleaning system. We prioritize this feature because it uses force to flush out calcium and sediment; unlike gravity-based systems, this pressurized flush is significantly more effective at preventing element failure in high-traffic spas.

We calculate the base volume as Length x Width x Height, but we strictly require adding wall material factors. For instance, if the rooms utilize natural stone or marble, we suggest increasing the cubic footage calculation by 100% to account for the material's rapid heat absorption.

We have verified that a ThermaSol generator can be installed up to 50 feet away from the steam room. We commonly suggest locations such as nearby service closets, heated attics, or crawl spaces that provide clear access for maintenance.

Yes. For both safety and routine maintenance, we require the generator to be installed near a floor drain. This is mandatory for the discharge from the Safety Relief Valve and the high-temperature water purge during the PowerClean cycle.

We consider a drip pan mandatory if the generator is installed above a finished ceiling or in an attic. Most US building codes require this to catch condensation or minor leaks, preventing thousands of dollars in potential structural and drywall damage.

ThermaTouch is a 7-inch or 10-inch smart tablet that manages steam, lighting, and streaming apps. SignaTouch is a sleeker, vertical interface that focuses strictly on steam, light, and sound. We recommend SignaTouch for facilities seeking a simplified, focused user interface.

Yes. We ensure all ThermaSol digital controllers are 100% waterproof and designed for in-shower mounting. This allows guests or staff to adjust session timing and temperature directly while the room is in operation.

In our experience, this indicates a communication break, often due to a pinched data cable. We recommend inspecting the cable for damage during the rough-in phase to ensure the digital handshake between the generator and keypad is preserved.

This is typically caused by a "trap" or dip in the steam line where condensation has pooled. We strictly suggest ensuring the steam pipe has a continuous slope toward either the generator or the steam head to prevent blockages and water discharge.

In a residential environment with consistent PowerClean use, we see elements last 10–15 years. For commercial environments with back-to-back sessions, we recommend annual inspections and the use of water softeners to maximize element lifespan.

Yes. We provide steam heads featuring integrated aromatherapy wells. By adding a few drops of pure essential oils directly into the well, the heat of the steam naturally disperses the fragrance throughout the enclosure.

ThermaSol offers one of the most robust US warranties: a Limited Lifetime Warranty on the generator chassis and a 2-year in-home warranty on parts and labor for the PRO series. We view this as a significant indicator of long-term brand reliability.

Yes. In the luxury real estate market, we have found that a branded steam system like ThermaSol is viewed as a high-value wellness asset, often delivering a higher resale ROI than traditional bathroom upgrades.

This is an all-in-one "Total Wellness" module that replaces a standard showerhead. We recommend this for facilities wishing to integrate chromotherapy and high-fidelity audio into the steam experience through a single, ceiling-mounted fixture.

SteamVection is a proprietary ThermaSol innovation that utilizes physics to ensure vertical temperature uniformity. We utilize this to prevent the "cold-feet" problem, ensuring the entire vertical space maintains a consistent heat profile.

Yes, but we strictly advise ensuring the glass door has a vapor-tight seal at the floor level. Without a curb, the door sweep must be perfectly calibrated to keep the steam contained and prevent moisture damage to the outer bathroom flooring.

We reassure our clients that this is the normal sound of internal contactors engaging. It is a standard mechanical operation for high-amperage 240V equipment when the heating elements are activated.